Index Search; Next Function Memory; Repeat Playback; Skip Search - JVC HR-J281 Instructions Manual

Index Search

Your recorder automatically marks
index codes at the beginning of
each recording. This function gives
you quick access to any one of 9
index codes in either direction.
NOTE:
Before starting, make sure the
recorder is in the Stop mode.
Activate Index Search.
w e 2 6
Press or ( or
displayed on the TV screen and search begins in the
corresponding direction.
To access index codes 2 through 9, press
until the correct index number is displayed.
Example:
To locate the beginning of B from the current position, press
twice.
To locate the beginning of D from the current position, press
once.
Current position
When the specified index code is located, playback begins
automatically.

Skip Search

During playback, press 30 SEC 1 to 4 times to skip over
unwanted sections. To resume normal playback, press
Each press initiates a 30-second period of fast-motion
playback. Normal playback resumes automatically.
2 6
). " 1" or " 1" is
w e
or repeatedly
Index number

Next Function Memory

The Next Function Memory "tells" the recorder what to do after
rewinding. Before continuing, make sure the recorder is in the
Stop mode.
a- For Automatic Start Of Playback
3
Press , then press
b- For Automatic Power Off
3
Press , then press
c- For Automatic Timer Standby
3
Press , then press

Repeat Playback

Your recorder can automatically play back the whole tape 100
times repeatedly.
1
Start playback.
w
4
Press .
e
2
Activate Repeat Playback.
4
Press and hold for over 5 seconds, then release.
The Play indicator (
slowly.
After playing back a tape 100 times, the recorder stops
automatically.
3
Stop Repeat Playback.
8
Press at any time.
4 3
Pressing ,
4
.
4
within 2 seconds.
1
within 2 seconds.
#
(TIMER) within 2 seconds.
$
) on the front display panel blinks
5 9
, or also stops Repeat Playback.
17
EN