JVC HR-J281 Instructions Manual page 23

D
Set the tape speed. (HR-J480EU only)
p
Press SP/LP ( ).
E
Set the VPS/PDC mode.
Press VPS/PDC to select "ON" or "OFF".
If "VPS/PDC ON" is displayed on the TV screen, VPS/PDC is
set to ON.
If "VPS/PDC OFF" is displayed on the TV screen, VPS/PDC is
set to OFF.
"VPS/PDC Recording" on page 25.
F
Return to the normal screen.
Press PROG or OK. "PROGRAM COMPLETED" appears
on the TV screen for about 5 seconds, then the normal
screen appears. If "PROGRAM OVERLAPPED" appears
on the TV screen, see page 27.
6
Repeat steps 1 – for each additional programme.
G
Engage the recorder's timer mode.
#
Press (TIMER). The recorder turns off automatically and
#
appears on the front display panel.
To disengage the timer mode, press
NOTES:
To Change The Stop Time . . .
. . . press STOP +/– after pressing OK in step 3. You can
compensate for anticipated programme schedule delays.
To Timer-Record Weekly Or Daily Serials . . .
. . . after pressing OK in step 3, press WEEKLY (NUMBER key
"9") for weekly serials or DAILY (NUMBER key "8") for daily
serials (Monday — Friday). Either "WEEKLY" or "DAILY"
appears on the TV screen. Pressing the button again makes the
corresponding indication disappear.
You can programme this recorder to timer-record as many as 8
programmes. If you try to programme the recorder to record a
ninth, "PROGRAM FULL" appears on the TV screen. To record
the extra programme, you must first cancel any unnecessary
programmes ( pg. 26).
It is not possible to timer-record a TV programme with a
S V number which starts with "0".
HOW IEW
#
(TIMER) again.
ATTENTION
Guide Program Number Set
"GUIDE PROG SET" appears after performing step 3 if the
Guide Program number for the S
entered has not been set.
Press the NUMBER keys or
position number on which your recorder receives that
station, then press OK or
number. The S V
HOW IEW
EN
V number you
HOW IEW
rt
to input the channel
e
to set the Guide Program
Program screen appears.
(Example)
To timer-record a ZDF
programme with the
S V system.
HOW IEW
* If your recorder receives ZDF on
the channel position 2, press OK
e
or after entering "2".
23