UTStarcom F1000 User Manual page 8

Press
key (Ok). The following options will be available:
SSID
This option enables you to save an AP's SSID to the AP profile.
After accessing this option, enter the SSID (32 alphanumeric characters
maximum), and then press the left soft key
operation.
Security Mode
This option enables you to set the security mode for the AP profile.
After accessing this option, select Open AP, WEP Key or WPA-PSK:
If WEP Key is selected, the phone will then display the options of WEP
Key Info (refer to "WEP Key Info")
If WPA-PSK is selected, the phone will then display the PSK-editing
screen (refer to "WPA-PSK Info")
WEP Key Info
If the AP profile's security mode is set to WEP Key, select this option to set
the WEP key. After accessing this option, observe the following operations:
1. Select Auth Method, and then select the authentication method: Open
Key or Shared Key.
2. Select 64bit or 128bit according to the AP's WEP key setting. Enter the
WEP key that the AP used, and press the left soft key
- If 64bit is selected, ensure that the WEP key consists of five ASCII
characters or ten hexadecimal characters
- If 128bit is selected, ensure that the WEP key consists of 13 ASCII
characters or 26 hexadecimal characters
3. Select WEP Key Index. Enter the WEP key index (1-4), and then press
the left soft key
8
www.voipon.co.uk sales@voipon.co.uk Tel:(0)1245 808195 Fax: (0)1245 600030
to highlight the desired AP profile, and then press the left soft
(Ok).
(Ok) to complete the
(Ok).