Table of Contents
Advertisement
6
EN
Auto Set Up
Auto Channel Set
Before starting, make sure of the following:
The TV aerial cable should be connected to the recorder.
The recorder's mains power cord should be connected to
a mains outlet.
pg. 3
The "Video Channel Set" procedure should be done first and
the TV should be set to its AV mode (with AV connection
pg. 5) or video channel (with RF connection
1
4
7
1
pg. 4).
2
3
2
5
6
8
9
0
4
OK
PUSH JOG
INITIAL SETTINGS (cont.)
The Auto Set Up function simplifies installation by guiding you
through the procedures of setting the language, clock and tuner
channels — simply follow the on-screen menus that appear
when the
button is first pressed to power on the recorder
after you plug the mains power cord into a mains outlet.
IMPORTANT
Don't press any buttons on the recorder or remote that
are not directly related to the step you are performing
while Auto Set Up is in progress.
If you perform Auto Set Up successfully during installa-
tion, there's no need to separately perform the Language
Select, Clock Set or Channel Set procedures, but if
adjustments become necessary they can be performed as
follows:
– To change the selected language
– To reset or adjust the time
– To add/delete channels manually
– To reset the tuner after moving to a different location
pg. 32
PERFORM AUTO SET UP
1
Press
.
The Language Select screen appears.
SELECT LANGUAGE
2
Press PUSH JOG %fi to place the pointer next to your
desired language (English or Russian), then press OK or
PUSH JOG
.
The Clock Set screen appears.
SET TIME
3
Press PUSH JOG %fi to
set the time, then press OK
or PUSH JOG
.
Press and hold either
button to delay or
advance the time by 30
minutes.
SET DATE
4
Press PUSH JOG %fi to set the date, then press OK or
PUSH JOG
.
Press and hold either button to change the date by 15
days.
SET YEAR
5
Press PUSH JOG %fi to set the year, then press MENU.
pg. 8
pg. 9
pg. 34 – 35
CLOCK SET
TIME
DATE
YEAR
0: 00
01 . 01
98
[5 ∞ ] =
[MENU] : EXIT
Advertisement
Table of Contents
