Table of Contents
Advertisement
4
EN
Video
Channel Set
Video Channel (RF Output Channel) is the channel on
which your TV receives picture and sound signals from the
video recorder through the RF cable.
1
4
7
1
TEST SIGNAL
To view picture signals from the video recorder, set
your TV to the Video Channel.
2
3
2
5
6
8
9
0
4
OK
The channel on which the screen to
the left appear clearly in step 3 is
your Video Channel.
If you have connected the video recorder to your TV
via the provided RF cable only (RF connection) – Go to
"With RF Connection" below.
If you have connected the video recorder to your TV
via both the provided RF cable and an AV cable (AV
connection) – Go to "With AV Connection" on next
page.
With RF Connection
IMPORTANT:
Before performing the following steps, make sure the
recorder's power is off and there is no cassette inserted in
the recorder.
ACCESS VIDEO CHANNEL
SET MODE
1
Hold down STOP/EJECT on the recorder until the
display panel shows the following.
SELECT TV SYSTEM
2
Press TV PROG + or – to set appropriate TV system that
matches the system of TV being used (refer to the table
below).
1 : B/G
Major Countries
Austria, Denmark, Finland, Holland,
Italy, Norway, Spain, Switzerland,
Sweden, Germany, Egypt
China, Mongolia, Rumania, Bulgaria,
Czech Rep., Slovakia, Hungary, Poland,
Russia
INITIAL SETTINGS
2 : D/K
TV System
B/G
D/K
Advertisement
Table of Contents
