JVC HV-29JH24 Instructions Manual page 62

Using the TV's menu
Press the 5 buttons.
3 Press the MENU/OK button.
4 Press the 6 buttons to choose a TV
channel.
• The TV shows the TV programme
which the chosen TV channel is now
broadcasting.
5 Press the blue button to set this
function to the TV channel.
n (CHANNEL GUARD) appears and the
TV channel is locked.
To cancel this function:
Press the blue button again.
n (CHANNEL GUARD) disappears and
the lock is released.
6 Press the MENU/OK button to
complete the setting.
The menu disappears.
To view a locked TV channel:
1 Choose a programme number in
which a TV channel locked with the
number buttons or PR LIST.
The screen changes to blue and the n
(CHANNEL GUARD) appears.
• You cannot choose a locked TV
channel with the 6 buttons.
2 Press the DISPLAY button to display
"ID NO." (ID number input screen).
22
3 Press the number buttons to enter the
ID number.
The lock is temporarily released so you
can view the TV channel.
If you have forgotten the ID number:
Perform step 1 of "To set this function:" on
page 21. After confirming the ID number,
press the TV/VIDEO button to exit the menu.
• When you would like to cancel the
CHANNEL GUARD function, you must
perform the operation "To set this
function" again.
AUTO SHUTOFF
You can set your TV to turn off if no signal is
received for about 15 minutes or longer
after the end of a broadcast.
ON:
This function is turned on.
OFF:
This function is turned off.
• The AUTO SHUTOFF function does
not turn off the TV's main power.
• The AUTO SHUTOFF will not work for
a VIDEO mode.
VIDEO-3 SETTING
Set the VIDEO-3 SETTING correctly
according to the video signal input from the
external device connected to the VIDEO-3
terminal. If this setting is incorrect, images
will not be displayed.
VIDEO:
If a normal video signal (composite video
signal) is input.
COMPONENT:
If a Component video signal (Y/C
signals) is input.
• For detailed connecting methods, see
"Additional preparation" on page 28.
This Television is compatible with the
Progressive video signal (525P signal
and 625P signal) only when the
component video signal is input.
/C
B R