JVC HV-29JH24 Instructions Manual page 59

• For details of each item, see
"PICTURE MODE" on page 15,
"DIGITAL VNR" on page 16, "WHITE
BALANCE" on page 16, "DigiPure" on
page 17.
Item
PICTURE MODE BRIGHT*, STANDARD,
SOFT
DIGITAL VNR AUTO*, MAX, OFF, MIN
WHITE COOL, MID*, WARM
BALANCE
DigiPure AUTO*, MAX, OFF, MIN
PICTURE ON*:
EFFECT Above picture effect
applies to the chosen
favorite channel.
OFF:
No picture effect applies.
*: When shipped
4 Press the MENU/OK button to
complete the setting.
VIDEO SETTING
You can set a dedicated picture effect for
the video inputs, VIDEO-1 to -4.
1 Choose VIDEO SETTING, then press
the MENU/OK button.
2 Press the 6 button to choose
VIDEO STATUS, then press the 5
button to choose one of video inputs,
VIDEO-1 to -4.
Options
3 Set the picture effect.
Press the 6 button to choose an item
listed in the following table and press the
5 button to choose one of options.
• As explained in the table, the
PICTURE EFFECT for the video inputs
is set to OFF when shipped. To use it,
you need to set it ON.
Item
PICTURE MODE BRIGHT*, STANDARD,
SOFT
DIGITAL VNR AUTO*, MAX, OFF, MIN
WHITE COOL, MID*, WARM
BALANCE
DigiPure AUTO*, MAX, OFF, MIN
PICTURE ON:
EFFECT Above picture effect
applies to the chosen
video input.
OFF*:
No picture effect applies.
*: When shipped
• For details of each item, see
"PICTURE MODE" on page 15,
"DIGITAL VNR" on page 16, "WHITE
BALANCE" on page 16, "DigiPure" on
page 17.
• Pressing the number button "0" will
return the picture effect to the factory
set value.
4 Press the MENU/OK button to
complete the setting.
Using the TV's menu
Options
19