Remote Control Buttons - JVC HV-29JH24 Instructions Manual

Remote control buttons and functions
MUTING
SYSTEM
COLOUR
DISPLAY
TV/VIDEO
PICTURE
MODE
CHANNEL
8
POWER
CINEMA
SURROUND
SOUND ZOOM
MENU
OK
1 2 3
4 5 6
7 8 9
RETURN +
0
VOLUME
FAVORITE CH
Turn the TV on from standby
mode
Press the POWER button.
The POWER lamp lights red to green and
your TV will be turned on.
• You can turn on the TV from the
standby mode by pressing the TV/
VIDEO button, the CHANNEL-/+
buttons or the number buttons.
To turn the TV off:
Press the POWER button again.
The POWER lamp changes from green to
red and the TV enters standby mode.
Choose a TV channel
Choose a programme number in which a
TV channel has been set.
Press the CHANNEL-/+ buttons or enter
the programme number (PR) with the
number buttons.
• If you want to put a two-digit channel
into the TV, press the -/--button to
change to the two-digit entry system.
• You can select a channel from the PR
LIST. For details, see "DISPLAY
button" on page 11.
• If you do not have a clear picture or no
colour appears, follow the operation
procedure "COLOUR SYSTEM button"
on page 11.
Adjust the volume
Press the VOLUME-/+ buttons.
Watch images from an
external device
Choose a VIDEO terminal to which the
external device has been connected.
Press the TV/VIDEO button.
• You can choose a VIDEO terminal with
the CHANNEL-/+ buttons or from the
PR LIST.
To return to a TV channel:
Press the TV/VIDEO button, the
CHANNEL-/+ buttons or the number
buttons.