Advertisement
F) FITTING METHOD OF HANDS
Place the module on case back shown in the figure and position the reference hand,
then fit the hands according to the following procedure.
Chronograph
minute hand
Hour hand
Chronograph
hour hand
1. Pull out the crown to the time setting position. (2nd Click Position)
2. Turn the crown anticlockwise, and stop turning right after the date changes. After the date
starts changing, turn the crown slowly.
3. Push in the crown by one step. Be careful of not turning the crown.
4.Fit the reference hand, hour hand and minute hand to the 12-o'clock position.
When fitting the hands, remove the case back and place the movement on work stand.
These specifications might be changed without prior notice.
Second hand
or 1/20 sec
chronograph hand
Chronograph
second hand
Button A
Minute hand
Normal crown
position
Button B
Calendar
Advertisement
