Port Mirror; Dhcp; Dhcp Settings - TP-Link TL-R480T+ User Manual

TL-R480T+
Two VLANs - In this VLAN mode, the LAN1 and LAN2 are in one VLAN, and the
LAN3 is in another VLAN. So LAN1 can communicate with LAN2 but LAN1 or
LAN2 cannot communicate with LAN3.
Three VLANs - In this VLAN mode, all ports are in different VLANs. So they cannot
communicate with each other.

5.4.9 Port Mirror

You can configure LAN port mirror feature on this page.
Mirroring Port - The port will collect packet from Mirrored Port(s).
Mirrored Port(s) - Any packets through the Mirrored Port(s) will be copied and be
forwarded to the Mirror Port.
Note:
i. The Mirror port cannot be mirrored.
ii. All in the Mirrored Port(s) means all LAN ports except for Mirror Port.

5.5 DHCP

Figure 5-15 DHCP menu
There are three submenus under the DHCP menu (shown in figure 5-15): DHCP
Settings, DHCP Clients List and Address Reservation. Click any of them, and you will
be able to configure the corresponding function. The detailed explanations for each
submenu are provided below.

5.5.1 DHCP Settings

The router is set up by default as a DHCP (Dynamic Host Configuration Protocol) server,
which provides the TCP/IP configuration for all the PCs that are connected to the router
on the LAN. The DHCP Server can be configured on the page (shown in figure 5-16):
Load Balance Broadband Router User Guide
Figure 5-14 Port Mirror
- 24 -