Table of Contents
Advertisement
HR-IP820U INDEX Plus+
97.5.20 5:45 PM
Recording
Setting The Cable Box Channel
Number
After the record mode is initiated, the cable box
channel number must be set if a cable box is in use.
The screen will ask for the cable box channel number.
Procedure
1 Enter the cable box channel number using the
DIGIT keys.
2 Press ENTER.
Setting The Tape Number
After recording has been initiated, the VCR must know
the Tape Number before the data can be stored in
memory. If you know the number but the VCR can't
read it, you need to enter it. When using a brand new
tape, you have to command the VCR to assign a Tape
Number for you. The procedure differs slightly
depending on the situation.
Preparation
1. Turn on the power to the TV and the VCR.
2. Set the TV to the channel or mode appropriate for
video playback.
Procedure
1 a Insert a tape. If the
screen to the right
appears (when using a
new tape or one
recorded on a non-
INDEX Plus+ VCR),
continue from step 2.
ATTENTION:
When using an RI tape, if the screen in step 1 a
appears, skip to step 3.
If you use a tape that already has a Tape
Number and has been recorded on, but has not
been entered in the library, the screen in step 1 a
appears. Skip to step 3.
In the event that you press STOP at the
"READING TAPE# . . ." screen, stopping Tape
Number reading partway through . . .
. . . if the inserted tape has not yet been assigned
a Tape Number, go to step 2.
. . . if the inserted tape has already been
assigned a Tape Number, go to step 3.
14
Page 14
TAPE# CAN NOT BE READ
b Insert a tape. If the
screen to the right
appears (as when
using a tape that
already has a Tape
Number and has been
entered), skip to step
4.
c Insert a tape. If the
screen to the right
appears (as when
using a tape that has a
directory which is not
recognized by your
VCR), skip to step 5.
2 Start recording.The
screen to the right
appears:
Press 2, or don't press either 1 or 2. The new Tape
Number is automatically assigned. Go to step 6.
3 Start recording. The
screen to the right
appears:
Press 1.
The screen to the right
appears:
Use the DIGIT buttons to enter the Tape Number. (To
make corrections to the number you've entered, press
CLEAR and input the correct number. To quit the
process, press CANCEL and the previous screen
reappears.) Once the correct number has been input,
press ENTER.
TAPE#0123
MUSIC TV
DIRECTORY DOES NOT EXIST
IN THIS VCR
RECORDING...
TAPE# CAN NOT BE READ
1 INPUT TAPE#
2 CREATE NEW TAPE#
PRESS(1)or(2)
RECORDING...
TAPE# CAN NOT BE READ
1 INPUT TAPE#
2 CREATE NEW TAPE#
PRESS(1)or(2)
TAPE#
[
]
PRESS(DIGITS)
THEN PRESS(ENTER)
PRESS(CLEAR)TO MAKE
CORRECTION
PRESS(CANCEL)TO RETURN
Continued on next page.
Advertisement
Chapters
Table of Contents
