Position Menu; Route Information Screen - Clarion NP509 User Manual

4.1.5 Position menu

When you follow the recommended route on the map (the Cursor is the current GPS position), the
Position menu replaces the Cursor menu. It does not contain buttons that modify the current route, as
the GPS position is not useful as a route point.
To open the Position menu, tap

4.1.6 Route Information screen

The Route Information screen has all the data and some of the functions you need while you
navigate. There are two ways to open this screen:
x
It can be opened directly from the Map screen by tapping the Turn Preview field (
x
In Advanced mode, from the Navigation menu tap the following buttons:
In the top section of the screen you see information about the current route. The fields on this screen
are continuously updated while you keep the screen open.
When you open the screen, all fields contain information about reaching your final destination. Tap
any of the fields to see data on the via points starting from the first one through the final destination
again.
You have the following data and functions on this screen:
Name
Route line The upper part of this screen shows your planned
route as a horizontal line. Its leftmost point is the
start of the route, the rightmost one is the final
destination, and you can see your via point flags
along the line, spaced in proportion to their
distance.
Estimated Shows the estimated arrival time at the final
Arrival destination of the route based on information
available for the remaining segments of the route.
The calculation cannot take into account traffic jams
and other possible delays.
Distance Left Shows the distance you need to travel on the route
before reaching your final destination.
Time Left Shows the time needed to reach the final
destination of the route based on information
available for the remaining segments of the route.
The calculation cannot take into account traffic jams
and other possible delays.
Method This field shows how the route was calculated. It Tap this field to change the
54
.
Description
).
,
Function
Tap this field to change the
content of all data fields to via
point information.
Tap this field to change the
content of all data fields to via
point information.
Tap this field to change the
content of all data fields to via
point information.
Tap this field to change the
content of all data fields to via
point information.
.