Clarion NP509 User Manual page 37

x
: The map appears with the Cursor in the middle. Modify the location of the Cursor
if necessary, then tap
location.
x
x
x
the detour it adds to the active route. This can be useful if you search for a later
stopover that causes only a minimal detour, for example upcoming gas stations or
restaurants.
3. You can narrow the search with the following:
x
Select the POI group (e.g. Accommodation), and after that, if needed, select the POI
subgroup (e.g. Hotel or Motel).
x
To find the POI by its name, tap
name.
x
To list all POIs in a given POI group, tap
4. [optional] When finally the list of results appear, you can sort the list:
x
location)
x
(available when you search around a single location)
x
(available when you search along the active route)
x
along the active route)
5. Tap the desired POI in the list.
6. Review the details of the selected item and tap
7. The map appears with the selected point in the middle. Tap
mode) or
automatically calculated, and you can start navigating.
. The POI will be searched for around the given
: The POI will be searched for around the current GPS position.
: The POI will be searched for around the destination of the active route.
: The POI will be searched for not around a given point, but by the size of
: sort the list alphabetically (available when you search around a single
: sort the list by the distance from your current position in a straight line
: sort the list by the distance to drive on route from your current position
: sort the list by the size of the needed detour (available when you search
(Advanced mode) from the Cursor menu. The route is then
, and use the keyboard to enter a part of the
.
.
(Simple
37