Panasonic DMR-BST835 Operating Instructions Manual page 25

6
Make the settings of user band.
User Band Settings
Start Auto Setup
Please confirm user band settings before starting Auto Setup.
Tuner 1
User Band
User Band Frequency
User Band PIN
Tuner 2
User Band
User Band Frequency
User Band PIN
Select
OK
RETURN
• User Band
You can set C1 to C8. Set to a User Band
not used by any other device.
• When only one User Band of the Router
is assigned, set "Tuner 2" to "Off". Note
that you will not be able to record two
programmes simultaneously or watch TV
during recording.
• User Band Frequency
Set the User Band Frequency with number
buttons.
• User Band PIN
If the single cable router requires a PIN to
access an user band, enter the PIN.
• For details, read the manual of the single
cable router, etc.
7
Select "Start Auto Setup", then press [OK].
C1
1284 MHz (preset: 1284 MHz)
Off
C2
1400 MHz (preset: 1400 MHz)
Off
8
Select the search mode, then press [OK].
Auto Setup starts.
These operations (Searching Satellite and
Searching Channels) may take some time.
Auto Setup
Satellite Checking LNB1
Progress
0%
This will take up to 40 minutes.
Tuner 1 Checking...
Satellite
Press RETURN to skip Satellite installation
Searching Satellite
RETURN
After tuning has been completed, clock will
be set automatically.
If the clock setting screen appears, set the
time manually (
To set Quick Start settings
1 Press [FUNCTION MENU].
2 Select "Basic Settings" in "Setup", then press
[OK].
3 Select "Standby Settings" in "Others", then
press [OK].
4 Select "Quick Start", then press [OK].
5 Refer to page 22, step 5.
To start Easy Network Setting
1 Press [FUNCTION MENU].
2 Select "Basic Settings" in "Setup", then press
[OK].
3 Select "Easy Network Setting" in "Network",
then press [OK].
4 Refer to page 23.
To confirm that channels have been tuned
correctly
Refer to "Using Channel List". (
Getting started
100%
Tuner 2 Checking...
99, Clock).
28)
VQT4W69
25