Common Interface; Deep Colour Output; Hdmi Audio Output; Ch Audio Reformatting - Panasonic DMR-BST835 Operating Instructions Manual

Deep Colour Output

This setting is for selecting whether to use
Deep Colour output when a TV that supports
Deep Colour is connected.

HDMI Audio Output

Select "Off" when connected to an
amplifier/receiver with a DIGITAL AUDIO
OUT terminal.

7.1ch Audio Reformatting

[BST835]
[BD-V]
Surround sound with 6.1 ch or less is
automatically expanded and played back at
7.1 ch.
• If "Off" is selected, sound is played over the
original number of channels. (Note that in
the case of 6.1 ch audio, playback will be at
5.1 ch)
Audio reformatting is enabled in the following
cases:
- When you have selected "PCM" in "Digital
Audio Output". ( 92)
- When the audio is Dolby Digital, Dolby
Digital Plus, Dolby TrueHD or LPCM.
Contents Type Flag
If "Automatic" is selected, the optimal method
of playback depending on the TV (e.g.
cinema) will automatically be selected (only
when the TV supports Contents Type Flag).
VIERA Link
Select "Off" when you do not want to use
"HDAVI Control".

Common Interface

Access to software contained on CI module.
( 14)
• Select "Slot 1:" or "Slot 2:" and press [OK].
Follow the on-screen instructions.
• This setting cannot be made when "TV
System" is set to "NTSC" (
• On-screen instructions may not correspond to the remote
control buttons.
• For more information about TV service, please contact
your service provider.
• Depending on the card, in some cases its use together
with this unit may be limited or not possible.
Convenient functions
94).
95
VQT4W69