Input Selection And Av Connections; Selecting Input Signal; Output Signal For Scart 2 - Toshiba 43VJ22P Owner's Manual

Input selection and AV connections

Defining your INPUT and OUTPUT sockets so that your television recognises connected equipment.
Most video recorders and decoders send a signal
through the Scart lead to switch the TV to the correct
Input socket. Alternatively press the external source
B
selection button repeatedly until you see the picture
from your equipment.
An S e.g. EXT2S, indicates the input is set for an
S-Video signal.
Input Selection
Using the Input Selection if the TV does not switch over
automatically.
Press the button to bring up EXT1 on the
B
1
screen. This will display the signal coming in
through Scart 1.
Press the button again to select the equipment
B
2
connected to Scart 2 (EXT2).
And press the button again for EXT3
B
3
I
(Scart 3, , on the back of the TV or
on the side of the TV).
To return to TV mode simply press one of the
4
numbered buttons on the remote control.
To view the external equipment once again,
simply press the
B
external source.
ADDITIONAL FEATURES
J ,
button until you see your
Selecting the INPUT signal
This feature allows you to specify the type of signal going
into Scarts 2 (EXT2) or 3 (EXT3) on the back of the
television and the sockets on the side (which are also
EXT3). Please refer to the manufacturers instructions for
the connected equipment.
From the
1
input and with the S or R button select either AV
or S-VIDEO as the required input.
If the colour is missing try the alternative setting.
Feature menu
EXT2 input
EXT3 input
EXT2 output
Picture position
Panel lock
Blue screen
Convergence
EXIT
Selecting the OUTPUT signal for Scart 2
In the Feature
1
change the
MONITOR = The picture on screen
TV = The last television programme selection.
EXT1 = The picture from equipment connected to
Scart 1.
EXT3 = The picture from equipment connected to
Scart 3 or the side input sockets.
Feature menu
EXT2 input
EXT3 input
EXT2 output
Picture position
Panel lock
Blue screen
Convergence
EXIT
14
Feature menu select EXT2 (or EXT3)
S-VIDEO
S-VIDEO
MONITOR
OFF
ON
: To exit
menu, using the S or R buttons,
EXT2 output option to:
S-VIDEO
S-VIDEO
MONITOR
: To exit
OFF
ON