Basic Playback - JVC HR-A590U Instructions Manual

Playback

Basic Playback

1 Load a cassette
POWER
VIDEO (MONO) L – AUDIO – R
Make sure the window side is up, the rear
label side is facing you and the arrow on
the front of the cassette is pointing
towards the VCR.
• Do not apply too much pressure when
inserting.
• The VCR turns on, and the counter on
the on-screen display is reset, automatically.
• If the cassette's record safety tab has been removed, playback
begins automatically.
2
Start playback
Press PLAY ( ).
During playback
Stop playback
Press STOP ( ) on the
Remote.
Pause playback and view still picture
Press PAUSE.
• Press PLAY ( ) to resume
normal playback.
Pause and Frame-by-Frame playback
Press PAUSE to pause, then
press PAUSE repeatedly.
Press PLAY ( ) to resume
normal playback.
REW
STOP/EJECT
CH
TV/VCR TIMER REC POWER
REC
OR Press STOP/EJECT ( /
) on the VCR.
Slow-motion
Press PLAY (
Remote.
• Playback will proceed at
1/10 th of the normal speed.
• Press PLAY (
normal playback.
PLAY
NOTE:
During slow motion picture, some noise might appear on
FF
the TV screen. Use the SET–/+ on the Remote to eliminate
the noise.
However, the VCR will turn to the default setting once a
power failure occurs.
Speed search
Press REW (
( ) on the Remote.
• Press PLAY (
normal playback.
Variable speed search
Press REW (
( ) repeatedly on the
Remote.
• Press PLAY (
normal playback.
• Each time you press REW
( ) or FF (
playback speed changes.
TAPE SPEED
SP
EP
When the tape is not running
Rewind/fast-forward
Press REW (
( ) on the Remote.
Eject the tape
Press STOP/EJECT ( / ) on
the VCR.
• You can also eject the
cassette when the VCR is
turned off.
Turn off the VCR
Press POWER on the
Remote.
) on the
OR Press Play (
VCR.
) to resume
) or FF OR Press REW (
FF (
) to resume
) or FF OR Press REW (
(
the VCR.
) to resume
) the
PICTURE SEARCH SPEED
PRESS ONCE
3X
9X
OR Press REW (
) or FF
(
OR Press POWER (
the VCR.
) on the
) or
) on the VCR.
) or FF
) repeatedly on
PRESS TWICE
5X
15X
) or FF
) on the VCR.
/l) on