Advertisement
Steps to Programming
Your Curtis Generation 3 cappuccino dispenser is Factory Pre-Set for Optimum Performance.
Entering the Programing Menus
Press and hold STOP/WASH for about ten [10] seconds. Display will
read Program Menus,(See Illustration).
Manual Dispense (Factory Default)
Press
or > to go to Manual Dispense Select.
Press ¤ to go to Manual Dispense Select Station.
Choose the station and press, the display will read Saving Complete!
To select another station for manual dispense, press
Dispense Select Station or press > to continue to the next menu.
Dispense By Time
The next screen is Dispense By Time < Select >. Press
Press desired dispense button. Hot water will start to dispense and screen will display To Finish Press Push. When Push is pressed, time will be
saved and you will exit back to Dispense by Time screen. Continue with additional selections or press > to continue to the next menu.
Temperature (Factory set at 190°F)
Press
and screen will show Tank Temperature. Temperature is programmable from 170°F to 204°F in 2-degree increments. Press < or > to go
up or down in degrees. Select desired temperature and then
Powder % Ratio (Factory set at 45%)
Press
and the screen will display Powder % Ratio Select Station. Press desired station. Powder ratio is programmable from 0% (Hot Water)
to 100%, in 5% increments. Press < or > to increase or decrease ratio and then press
Service Call (Phone number)
Press
to display number and press
a Heating system SENSOR ERROR or a WATER ERROR. Press > to continue to the next menu.
Banner Name
Press
to display letters, press
This feature allows up to 14 letters to be programmed for company name or regional name. Programming all blanks disables Banner Name. If
programmed, Banner Name is displayed every 5 sec. on and off. Press > to continue to the next menu.
Model Select
Press
to select, < or > to select desired model (PC-1, 2, 3, 4, 5) . Press
Exit
Press
to select, exits program mode and returns unit to operation.
Illustra
Illustra
Illustrated P
ted Parts List
ted P
ted P
arts List
arts List
arts List
Illustra
Illustra
ted P
arts List
Item N
Item Nº
Item N
P P P P P art N
art N
art N
art Nº
Item N
Item N
art N
1
WC-7348
2
WC-5863
WC-5864
2A
2B
WC-5863-101
2C
WC-5864-101
3
CA-1109-01
3A
CA-1110-01
4
CA-1127 **
5
WC-37126 **
WC-37127 **
5A
5B
WC-37128 **
WC-39349
6
7
WC-39350-01
7A
WC-39351-01
8
WC-39350-04**
9
CA-1098
9A
CA-1115
10
WC-8591 **
WC- 780
11*
12
WC-37123
CA-1039**
13
to go to Manual
to select a station. Select the station and the screen will read To Begin Press Push.
to set. Press > to continue to the next menu.
change number or > to move places and EX to exit when complete This number will be displayed during
to change letters or > to move places and EX to exit when complete.
Description
Description
Description
Description
Description
PANEL, LEFT SIDE PCGTs
DOOR, COMPLETE PCGT-3 MAGNET SNAP-IN
DOOR COMPLETE PCGT-4/5 MAGNET SNAP-IN
DOOR COMPLETE PCGT3 WITH LATCH
DOOR COMPLETE PCGT4/5 WITH LATCH
FILM, CURTIS LOGO PCGT-3
FILM, CURTIS LOGO PCGT-4/5
LAMP COMPLETE, W/5K BULB
KIT, UCM BOARD & LABEL PCGT3
KIT, UCM BOARD & LABEL PCGT4
KIT, UCM BOARD & LABEL PCGT5
LABEL ASSY, UCM & DOOR PCGT-3
LABEL, UCM PANEL PCGT4 CURTIS
LABEL, UCM PANEL PCGT5 CURTIS
MEMBRANE CNTRL PNL CURTIS PCGT4/5
COVER, ALCOVE PLASTIC PCGT-3
COVER, ALCOVE PLASTIC PCGT-4/5
CAPACITOR, X2 ALL ADS MODELS
CONTROL, POWER MODULE CORK BRAKE
FAN, EXTRACT
O-RING, DUMP VALVE (WC-880)
Program Menus
Select
PROGRAMMING SELECTIONS
to set. Press > to continue to the next menu.
to set and exit program mode.
Item N
Item N
Item Nº
P P P P P art N
art N
art Nº
art N
Description
Description
Description
Item N
Item N
art N
Description
Description
14
WC-5661
LID ASSY, TANK
15
WC-5502 **
PROBE ASSY, WATER LEVEL
16
WC-3734 **
KIT, RPL DUMP VALVE FOR WC-880E
17
WC- 904-04**
HEATING ELEMENT, 1.6KW W/JAMNUTS
18
WC-1438-101**
SENSOR, TEMERATURE TANK
19
WC- 523 **
THERMOSTAT, MNL RESET 120/240V 25A
20
WC- 102 **
SWITCH, TOGGLE NON LIT 25A 120/240V
21
CA-1100-101
COVER, DRIP TRAY PLASTIC PCGT-3
21A
CA-1106-101
COVER, DRIP TRAY PLASTIC PCGT-4/5
22
CA-1099-101
DRIP TRAY, PLASTIC PCGT-3
22A
CA-1105-101
DRIP TRAY, PLASTIC PCGT-4/5
23
WC-37215
KIT, COVER DRIP TRAY & SCREEN PCGT-3
23A
WC-37216
KIT, COVER DRIP TRAY & SCREEN PCGT-4/5
24
CA-1112-05
CANISTER ASSY, 5LB PCGTs
24A
CA-1113-05R
CANISTER ASSY, 10LB RIGHT PCGTs
24B
CA-1113-05L
CANISTER ASSY, 10LB LEFT PCGTs
25
CA-1011-05
FITTING, BULKHEAD WATER
26
CA-1065-03
BUSHING, DISCHARGE
27
CA-1026-03
ELBOW, PC/CK/HC
28
CA-1005-03 **
STEAM TRAP
29
CA-1009-03 **
BOWL, MIXING
3
Advertisement
