Miranda Dvi-Ramp Firmware Update - HP xw8400 Workstation Hardware Setup Manual

Go to the AJA_firmwareUpdate directory on the DKU CD. Type:
4.
cd /mnt/cdrom/Utils/AJA_firmwareUpdate
Run the AJAfw_update utility to scan the AJA current firmware and, if required, to update
5.
to the latest firmware version. Type:
./AJAfw_update
The script checks the firmware of your AJA board and one of the following events occurs:
•
The script detects that the firmware and drivers need to be updated and prompts you to
start the update. In this case, continue to the next step of this procedure.
•
The script indicates that the firmware is up-to-date and exits. In this case, you are done; go
to step 7 of this procedure to eject the DKU CD.
N :
For more details about the AJA firmware procedures, you can consult the README file
OTE
located in the current directory.
6. Start the firmware update by typing Y and then pressing E
While the AJA board's firmware and drivers are being updated, your workstation appears to
be frozen and your mouse and keyboard do not work. This is normal and indicates that the
firmware is being updated. Once the firmware update is complete, you are returned to the
terminal.
When you are returned to the terminal, return to the root directory and eject the DKU CD
7.
from the CD-ROM drive by typing the following commands:
cd /
eject /mnt/cdrom
Shut down your Linux workstation by typing:
8.
shutdown -g0
If your workstation does not prompt you to power down, press the power button for 10
seconds to force a power down.
9. Disconnect the power cord.
Wait 10 seconds, reconnect the power cord, and then restart your workstation normally.
10.

Miranda DVI-Ramp Firmware Update

If you are upgrading from a previous version of an Effects or Editing application, you may need
to update your DVI-Ramp firmware, depending on the hardware version of your DVI-Ramp
unit. The DVI-Ramp firmware update utilities required to check your firmware version and

Miranda DVI-Ramp Firmware Update

.
NTER
29