Connection; Connecting Video Signals - JVC BR-HD50E Instruction Manual

CONNECTION

Connecting video signals

Video output, e.g., VCR/Camera
Digital input
HDV/DV
Digital output
HDV/DV
Video input, e.g., VCR
Turn off the power before making connec-
tions.
Input signal
The input video signal is selected with the
INPUT SELECT switch on the front panel.
To input analog video signals
Use the LINE IN terminal or Y/C IN terminal.
• LINE IN terminal:
Inputs composite video signals.
Connect a BNC cable.
• Y/C IN terminal:
Inputs Y/C separate video signals. Connect
an S video cable (4PIN).
When a wide screen ID signal is input, the
ID signal is recorded.
E-26
Analog input
Composite
Y/C
IEEE1394
Composite
Y/C
Analog output
HD/SD Digital
HDMI OUT
HD/SD Analog
COMPONENT
OUT
To connect digital signals
Connect HDV signals or DV signals to the
IEEE1394 terminal.
Connect an IEEE1394 (6PIN) cable.
HDV signals using 720p format can be input.
HDV 720p format:
720/30p, 720/24p, 480/60p
720/25p, 576/50p
• The IEEE1394 switch located on the front
panel needs to be set, according to whether
the video format is HDV or DV.
• Digital audio is also input from the
IEEE1394 terminal.
• Power is not supplied via the IEEE1394 ter-
minal.
• Attach the supplied filter to the IEEE1394
cable. (XPage 29)
• For more information on the IEEE1394 termi-
nal, refer to page 18.
HD monitor
Monitor