JVC BR-HD50E Instruction Manual page 80

MENU SCREENS
Description of the Menu screens (continued)
TC/UB/CLOCK Menu screens
The TC/UB/CLOCK Menu consists of the following two screens. (1/2 and 2/2)
TC/UB/CLOCK [1/2] Menu screen
Item
TCG SELECT
(0500) EREGEN (01)
NDF/DF [60]
(0501) EDROP (01)
DF BIT [50]
(0502) EON (01)
TC DUPLI.: DV EOFF (00)
(0503)
TC OFFSET EOFF (00)
(0504)
NEXT BACK
PAGE BACK
E-76
Setting
PRESET (00) For selecting the time code generator mode.
PRESET
REGEN
NON DROP (00) For selecting the framing mode of the time code generator.
(Only for U model)
* Select here in the PRESET mode.
NON DROP : NON-DROP mode
DROP
OFF (00) For selecting whether to record drop-frame bits. (Only for E
model)
(In DV format mode only)
OFF : No recording
ON
For selecting the type of time code to be recorded with DV signal
AUTO (01) input (In DV format only).
NON DROP (02) OFF
AUTO
NON DROP : Records the time code input to the IEEE1394 ter-
For setting up the timing when time code data from the REMOTE
+1F (01) terminal of BR-HD50 to the editing remote controller are output.
+2F (02) OFF : Normal setting
–2F (03) +1F
–1F (04) +2F
–2F
–1F
For displaying the TC/UB/CLOCK [2/2] Menu screen.
For returning to the TOP Menu screen.
Description
: PRESET mode
: REGENERATION mode
: DROP-FRAME mode
: Recording
: Records time code of the built-in time code genera-
tor of BR-HD50.
: Records the time code input to the IEEE1394 ter-
minal. The framing mode of the time code will be
set automatically to the framing of the time code
input.
minal. The framing mode of the time code is fixed
to non-drop framing. (Only for U model)
Use this setting for dubbing tapes recorded with
BR-DV600, GY-DV500 or GY-DV550 in the NON-
DROP FRAME mode. (Only for U model)
: Outputs time code data +1 frame.
: Outputs time code data +2 frames.
: Outputs time code data -2 frames.
: Outputs time code data –1 frame.