Service Parts - Siemens TH 192 S Technical Instructions

TH 192 S Single Temperature Room Thermostat

Service Parts

Siemens Industry, Inc.
The following chart lists accessory parts and tools available for thermostat service.
Dial thermometer (-40 to 140°F, -40 to 60°C) with pocket case
Basic pneumatic calibration kit with thermometer, gauge, squeeze
bulb, fittings, and case
Test head kit
Calibration tools
Test probe to check pressure with cover on
Needle probe with 1-1/2" diameter gauge 0-30 psig
(0-200 kPa) and calibration/cover wrench
Needle probe, no gauge (package of five)
1-1/2" diameter gauge , 0-200 kPa,
back connected 1/8" NPT male
1-1/2" diameter compound gauge, 0-30 psig/0-200 kPa,
back connected 1/8" NPT male
1-1/2" diameter compound gauge, 0-30 psig/0-200 kPa,
bottom connected 1/8" NPT male.
Replacement for use with 192-633
Chassis tube connector replacement kit with mounting screws
(material for 10 thermostats included)
Restrictor plate replacement kit with filters and gasket
(material for 10 thermostats included)
Plug-in adapters for quick thermostat removal
Straight, blue (package of 20)
Straight, white (package of 20)
Air link connects adapters for pressure tests (package of 20)
Compression ring (package of 100)
Elbow (provides quick return for wall surface mounting), blue
(package of 20)
Elbow (provides quick return for wall surface mounting), white
(package of 20)
20 scim (5.4 ml/sec) restrictors for 1-pipe systems (package of 5).
(1/4 ", 6.4 mm, OD plastic barb unless noted.)
Brass coupling, 1/8" NPT (1 only).
Coupling
Tee
Pre-piped dual tee for dual 1-pipe systems
Table 4. Service Parts.
Description
Technical Instructions
Document Number 155-065P25
October 28, 2010
Part Number
141-0573
832-177
832-179
832-178
192-633
192-759
142-0344
142-0373
142-0426
192-525
192-321
192-485
192-486
192-501
141-388
192-487
192-488
184-040
184-116
184-113
184-130
Page 11