Table of Contents
Advertisement
F
Enter channel position
Press PR +/–.
G
Set tape speed
Press p to set the tape speed.
H
Access title edit screen
Press the number keys "1". The Title Edit
screen appears.
You can access the Title Edit screen
only when "PROG. NAVIGATION" is
set to "ON". (
16)
I
Enter programme title
Press the number keys and PUSH JOG e
to enter characters, then press OK. For
details, refer to "Entering character" on
page 15.
J
Return to normal screen
After confirming all information is
correct, press PROG or OK. "PROGRAM COMPLETED" appears
on the screen for about 5 seconds, then normal screen appears. If
"PROGRAM OVERLAPPED" appears on the screen, see page 13.
Repeat steps 1 – 10 for each additional programme.
K
Engage recorder's timer mode
Press #. The recorder turns off automatically and "#" appears on
the display panel.
To disengage the timer, press # again.
NOTES:
To Timer-Record Weekly Or Daily Serials . . .
. . . anytime during steps 2 through 10, press WEEKLY (number
key "9") for weekly serials or DAILY (number key "8") for daily
serials (Monday – Friday). Either "WEEKLY" or "DAILY" appears
on the screen. Pressing the button again makes the
corresponding indication disappear.
You can programme this recorder to timer-record as many as 8
programmes. If you try to programme the recorder to record a
ninth, "PROGRAM FULL" appears on screen. To record the
extra programme, you must first cancel any unnecessary
programmes (
13).
In case of a power failure after programming, the recorder's
memory backup keeps your selections (if the lithium battery is
not exhausted).
21:00
22:00
1
25.12
[1] : TITLE
– P1 –
25.12
21:00 PR.1
[0-9] : SELECT LETTERS
[&] : DELETE
[Y/U] : CURSOR
[PROG] : EXIT
: OK
– P1 –
25.12
W
[0-9] : SELECT LETTERS
[&] : DELETE
[Y/U] : CURSOR
: OK
[PROG] : EXIT
— 12 —
24H Express Timer Programming
Before performing the following steps:
Insert a cassette with the safety tab in place. The recorder will
come on automatically.
Select the appropriate colour system (
You can programme a timer recording that starts within 24 hours.
A
Access 24HR Express Timer Programme display
Push 24H EXPRESS #. " " and start time start blinking on the
display panel.
Programme start time indicator
B
Set programme start time
Turn the JOG dial to the left or right. Then, push the JOG dial.
" " and start time start blinking on the display panel.
Programme start time indicator
One click stop of the JOG dial changes the time in 5-minute
intervals.
C
Set programme stop time
Turn the JOG dial to the left or right. Then, push the JOG dial and
channel number will start blinking.
Programme stop time indicator
One click stop of the JOG dial changes the time in 5-minute
intervals.
D
Set channel position
Turn the JOG dial to the left or right. Then, push the JOG dial and
channel number will start blinking.
You can cancel the setting at any time by pressing and holding
the JOG dial for more than 3 seconds. Repeat from the step 2.
E
Engage recorder's timer mode
Press 24H EXPRESS #.
The recorder turns off automatically and "#" appears on the
display panel.
16).
Advertisement
Table of Contents
