Table of Contents
Advertisement
5.1.4.2 Installing the RAID Driver (For bootable RAID Array)
After you complete the RAID BIOS setup, boot from the Windows CD, and the Windows Setup
①
program starts.
② Press F6 and wait for the Windows Setup screen to appear.
③ Specify the NVIDIA drivers:
a.
Insert the floppy that has the RAID driver, press S, then press Enter.
The Windows Setup screen appears as below:
b.
Select "NVIDIA RAID CLASS DIRVER" and then press Enter
c.
Press S again at the Specify Devices screen, then press Enter.
d.
Select " NVIDIA nForce Storage Controller" and then press Enter.
e.
The following Windows Setup screen appears listing both drivers:
65
Advertisement
Table of Contents
