4.2.6 SAS Cable Connection
Connector J10, J11 are used to connect SAS cable to each SAS HDD.
4.2.7 Jumper Setting on the SAS BP
Jumper J13, J14 are used to decide which enclosure monitoring controller will use in system.
Default setting is "1-2" for J13 and "1-3, 2-4" for J14 on-board SATA controller. If you want to use
add-on another SATA controller supporting SES(I2C) interface, you have to set the jumper to "2-3" for
J13 and "3-5, 4-6" for J14.
Connector
J10
J11
Jumper
SGPIO
J13
1-2
1-3
J14
2-4
Description
SAS Port 0-3
SAS Port 4-5
SES(I2C)
2-3
3-5
4-6
56