Setup - Toro Power Max 724 OE Operator's Manual

Setup

Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
5
6
7
8
Description
Handle bolts
Curved washers
Locknuts
No parts required
Nut
Bolt
Carriage bolts
Locknuts
No parts required
No parts required
No parts required
No parts required
Qty.
2
2 Install the upper handle.
2
–
Install the traction control linkage.
2
Install the chute.
2
2
Install the chute control rod.
2
–
Fill the engine with oil.
–
Check the tire pressure.
–
Check the skids and scraper.
–
Check the operation of the traction drive.
7
Use