Adjustments; Camera Section Adjustment; Preparations Before Adjustment (Camera Section); List Of Service Tools - Sony Handycam Vision CCD-TRV66E Service Manual

5-1. CAMERA SECTION ADJUSTMENT

1-1. PREPARATIONS BEFORE ADJUSTMENT (CAMERA SECTION)

1-1-1. List of Service Tools

• Oscilloscope
• Regulated power supply
Ref. No.
J-1 Filter for color temperature correction (C14)
ND filter 1.0
J-2
ND filter 0.3
J-3 Pattern box PTB-450
J-4 Color chart for pattern box
Adjustment remote commander (RM-95 upgraded).
J-5
(Note 2)
J-6 Siemens star chart
J-7 Clear chart for pattern box
J-8 Multi CPC jig
J-9 CPC-7 jig
J-10 Power cord (Note 2)
J-11 AFM DEV jig
J-12 Extension cable (16P, 0.5mm)
J-13 Extension cable (70P, 0.5mm)
J-14 IR receiver jig
Note 1: If the micro processor IC in the adjustment remote commander is
not the new micro processor (UPD7503G-C56-12), the pages
cannot be switched. In this case, replace with the new micro
processor (8-759-148-35).
J-1 J-2
J-6 J-7
J-11 J-12
SECTION 5

ADJUSTMENTS

• Color monitor
• Digital voltmeter
Name
J-3
J-8
J-13
• Vectorscope
Parts Code
Auto white balance adjustment/check
J-6080-058-A
White balance adjustment/check
J-6080-808-A White balance check
J-6080-818-A White balance check
J-6082-200-A
J-6020-250-A
J-6082-053-B
J-6080-875-A For checking the flange back
J-6080-621-A
J-6082-311-A For adjusting the LCD block
J-6082-382-A For adjusting the video section
J-6082-223-A For connecting the battery terminal and DC power supply
J-6082-312-A For adjusting the deviation
For extension between the CD-209 board (CN1401) and
J-6082-357-A
the VC-214 board (CN501)
For extension between the DD-117 board (CN931) and
J-6082-439-A
the VC-214 board (CN914)
J-6082-383-A For adjusting the IR transmitter
Note 2: Connect the adjustment remote commander to the LANC jack,
and set to HOLD switch to the "ADJ" side.
J-4
J-9
J-14
Fig. 5-1-1.
5-1
CCD-TRV66E/TRV77E
Usage
J-5
J-10