Installation Location - York YDCS-28CA15A Installation Manual

INDOOR UNIT SHOULD BE INSTALLED AT:
• A place where there is enough room for installation and maintenance.
• The ceiling is structurally sound to hold the Indoor Unit.
• A place that is well ventilated and the influence of weather is the least.
• A place that the airflow can reach every corners of the room.
• A place where the refrigerant connecting pipe and drain pipe can reach out easily.
• A place free of flammable gas or corrosive gas leakage.
• A place where there is no direct affection from man-made high-voltage current and highfrequency wave.
• A place which is far from noises and vibration.
CAUTIONS
Location in the following places may cause malfunction of the machine. (If unavoidable, please consult your local dealer.)
A. There is mineral oil like the oil of cutting machine.
B. There is much salty air. (Near the coast)
C. There is caustic gas such as sulfuric gas. (Near the hotspring.)
D. Factory where the voltage fluctuate greatly.
E. In the car or in the cabin.
F. In the kitchen or a place full of oil steam..
G. There is strong electromagnetic wave.
H. There is combustible gas or materials.
I. There is much evaporating acid or alkaline gas.
J. Other special areas.
NOTES BEFORE INSTALLATION
1. Decide the correct carry-in path.
2. Move this unit as originally packaged as possible.
3. If the air conditioner is installed on a metal part of the building, it must be electrically insulated according to the relevant
electrical code.
4. If installing in a lonely building or at a high position where it is hot and humid with frequent thunderstorm, lightning-
protection equipment is necessary.

INSTALLATION LOCATION

5