Set Up Menu; Set Up; Auto Startup; Auto Tuning - Sony Esprit TAV-L1 Operating Instructions Manual

Set Up menu

Set Up

Auto Startup

Auto Tuning

Programme Sorting

Programme Labels

AV Preset
Manual Programme Preset
Digital Set Up
Select: Set:
You can select the options listed below on the Set Up
menu. To select options, see "Navigating through
menus" (page 37).
Auto Startup
Starts the "first time operation menu" to tune in all the
available channels. Usually you do not need to do this
operation because the channels are already tuned
when the system was first installed (page 18).
However, this option allows you to repeat the process
(e.g., to retune the system after moving house, or to
search for new channels that have been launched by
broadcasters).
1
Press (OK) to select [Auto Startup].
2
Press (OK) to select [Yes].
The auto-tune display appears on the screen.
3
Follow steps 1 to 4 of "6: Auto-tuning the
TV" (page 18).
Auto Tuning (Analogue mode only)
Tunes in all the available analogue channels.
Usually you do not need to do this operation because
the channels are already tuned when the system was
first installed (page 18). However, this option allows
you to repeat the process (e.g., to retune the system
after moving house, or to search for new channels that
have been launched by broadcasters).
1
Press (OK) to select [Auto Tuning].
2
Press (OK) to select [Yes].
The auto-tune display appears on the screen.
3
Follow step 1 to 4 of "6: Auto-tuning the
TV" (page 18).
When all available analogue channels have been
tuned, the system returns to normal operation.
Back: End:
OK MENU
Programme Sorting
(Analogue mode only)
Changes the order in which the analogue channels are
stored on the system.
1
Press (OK) to select [Programme
Sorting].
2
Press M/m to select the channel you
want to move to a new position, then
press (OK).
3
Press M/m to select the new position for
your channel, then press
Repeat the procedure in steps 2 and 3 to move other
channels if required.
Programme Labels
(Analogue mode only)
Assigns a channel name of your choice up to five
letters or numbers. The name will be displayed briefly
on the screen when the channel is selected. (Names for
channels are usually taken automatically from Text (if
available).)
1
Press (OK) to select [Programme
Labels].
2
Press M/m to select the channel you
want to name, then press
3
Press </M/m/, to select the desired
letter or number ([s] for a blank space),
then press (OK).
If you input a wrong character
Press </M/m/, to select %/5 and press
(OK) repeatedly until the wrong character is
selected. Then, press </M/m/, to select the
correct character and press
4
Repeat the procedure in step 3 until the
name is complete.
5
Press </M/m/, to select [End], then
press (OK).
Repeat the procedure in steps 2 and 3 to move other
channels if required.
(OK).
(OK).
(OK).
Continued
43
GB