Using The Set Up Menu - Sony Trinitron KV-27S26 Operating Instructions Manual

MBE Adjusting your SET UP (menus) (continued)
A Using the SET UP menu CHANNEL — With the CHANNEL SET UP window open: ia recall
SET UP
1 Use ¢ or + to select the feature you want to change.
" GRANNEL EIX: OFF
Basic set up options | 2 Press to access the feature. CHANNEL ERASE ADD
3 s . : CHANNEL CAPTION
CHANNEL BLOCK cn for viewing CABLE: Select ON if your TV is connected to a cable system. MENU
VIDEO CADET rica (AUTO SET UP will set CABLE to ON automatically when it Use 0 ΠExit 9
TILT CORRECTION: 0 programs the TV)
CHANNEL FIX: Use this feature to set the TV's input to one of the following options:
Exit E 2-6: Choose when the cable box is connected to the VHF/UHF input and you do not want
to switch to AUX mode. Once this setting is made you will not be able to use the "TV
function" CH+/- to change channels; instead, use the "Cable function" CH +/-.
For detailed information on using the remote AUX 2-6: Choose when a cable box is connected to AUX and a cable or antenna is
to modify menu settings, refer to "Learning connected to ANT. You can alternate between the two inputs by pressing ANT on the
menu selection" on page 18.
remote control. (KV-27S36, 27V36, 29V36C; 29V76M, 32536, 32V36, 34V36C, 35S36,
35V36, 35V76, 37V36M only)
To select the SET UP == menu:
VIDEO 1: Choose when you have connected video equipment (e.g. AV receiver) and you
Display
==> Highlight Fa Select
want TV input fixed to it. You will only be able to switch between video sources.
-~
<ED nA
TIMER and CHANNEL BLOCK settings are erased when CHANNEL FIX is set.
MENU
Y S3) (YX
AUTO PROGRAM: Instructs the TV to automatically program all receivable channels.
5 @
@®
as
hatch
ray Cam Y CHANNEL ERASE/ADD: With the CHANNEL ERASE/ADD window open:
CHANNEL ERASE/ADD 1 Place the cursor next to ERASE or ADD.
h 2 Select the desired channel using CH+/-, or by selecting with
selo- fer (ei the 0-9 buttons and pressing ENTER.
If any menu items are "grayed out", press the eae 3 Press to activate.
ANT button on your remote so that a channel
CHANNEL CAPTION: With the CHANNEL CAPTION window open:
number appears.
CANEL CIOS 1 Press
and then ¢ or + on the select buttons to select
Favorite channel feature is not available for aad the desired channel, and press agan;
2 Press ¢ or + on the select buttons to display the first letter or
number of the caption and press to select it. (Repeat
until all four digits are selected)
3 Press to activate. To erase a Caption, press RESET.
the AUX input.
22