Timer Operations; Setting The Timer - JVC UX-G5 Instructions Manual

Remote control
PRESET UP,
PRESET DOWN
20

Timer Operations

Setting the Timer

Using Daily Timer, you can wake up with music, etc. On the
other hand, with Recording Timer, you can make a tape of a
radio broadcast automatically.
• You can store three Daily Timer settings and one
Recording Timer setting; however, you can activate only
STANDBY/ON
one of the four settings above at the same time.
• To exit from the timer setting, press CLOCK/TIMER as
SET
required.
CANCEL
• To correct a misentry during the process, press CANCEL.
You can return to the previous step.
CLOCK/
TIMER
How Daily Timer actually works
Once the Daily Timer has been set, the timer (
indicator and timer number indicator (1, 2, or 3) are lit on
the display. Daily Timer is activated at the same time
everyday until the timer is turned off manually (see the
next page) or another Daily Timer is activated.
When the on-time comes
The System turns on, tunes in to the selected station, or
starts playing the specified disc or the tape.
The volume level is the level when the unit was turned off
last time.
• When selecting "P – – –," the last tuned station will be
selected for Daily Timer.
About one hour after turning on the System, the System
stops it, and turns off (stands by) automatically.
• While Daily Timer is working, the timer (
timer number indicators (1, 2, or 3) flash on the display.
• The timer setting remains in memory until you change
it.
• Without canceling the Daily Timer, you can change the
source or adjust the volume after Daily Timer starts
playback.
How Recording Timer actually works
When Recording Timer has been set, Timer (
indicator and the REC indicator are lit on the display.
Recording Timer works only once.
When the on-time comes
The System turns on, tunes in to the specified station, and
starts recording.
The volume level is the level when the unit was turned
off last time.
When the off-time comes
The System stops recording, and turns off (stands by).
• The timer setting remains in memory until you change
it.
Remote
ONLY
)
) and
)