Timer Operations; Timer Play (Wake-Up Play) - JVC XU-301BKJ Instructions Manual

Timer Operations

1
CD
CD
CD
STANDBY
POWER
Lamp goes out.
STANDBY STANDBY
POWER POWER
46
• To ascertain the correct time
Use the time display on your TV screen or call the speaking clock.
• When a power failure has occurred or the power cord has been
disconnected
The time display is cleared, and the "
re-set the time by previous steps 1 and 2. When the power cord is left disconnected for an extended
period of time, the time display returns to "
• Setting the time while the power is ON
After the power has been turned on, press the TIMER/CLOCK button, select the present time display,
and set the time.
TIMER TIMER
/CLOCK /CLOCK
If the CANCEL button is pressed while setting the "minute" display, the flashing "hour" display is
restored. This function comes in handy for correcting the "hour" display.

Timer Play (wake-up play)

2
XU-301 MD-CD COMBINATION DECK
3
2
3
CD
-
1
PLAY & EXCHANGE
TIMER CD PITCH CONTROL
/CLOCK 1st TRACK LISTENING
REC EDIT
NORMAL SPEED
CD REC SKIP
1 Turn on the power.
• The selected function ("CD" at the time of purchase) is displayed.
2 Select the timer mode (DAILY TIMER or ONCE TIMER).
TIMER TIMER
/CLOCK /CLOCK
• The mode changes each time
this button is pressed.
Operating examples
• Set DAILY TIMER for timer playback.
• Set ONCE TIMER for timer recording.
" flashing display is returned. In a case like this,
."
DAILY TIMER
\
«
Function
ONCE TIMER
display
«
»
Present Time : Select this display and set the time.
Operate by following the steps
below in numerical order.
DIGITAL INPUT
32kHz 44.1kHz 48kHz
MIXING
REC REC REC
DIGITAL CD LINE MIC
PAUSE START STOP
REC SOURCE SELECTOR
SAMPLING RATE CONVERTER
DAILY TIMER : The timer is activated every day.
\
«
Function
ONCE TIMER : The timer is activated only once.
display
«
»
Present Time ("hour" display flashes.)
4 · 5
DISPLAY
EDIT TITLE /CHARA PLAY MODE
CANCEL SET
MIX BALANCE REC LEVEL
CD
MD
LINE CD MIN MAX
MIC LINE
MIC PHONES
3