Listening To The Radio - JVC UX-G5 Instructions Manual

Listening to the Radio

To select the AM tuner interval spacing
Some countries space AM stations 9 kHz spacing, and other
countries use 10 kHz spacing.
You can change the AM tuner intervals while the System is
on stand by.
1
2
sec.
On the main unit
• Current interval setting appears on the display.
2
Select the interval spacing while current setting
appears on the display.
9
10
To select the band (FM or AM)
To tune in to a station
While FM or AM is selected...
Remote control:
1
sec.
Frequency starts changing on the display.
When a station (frequency) with sufficient signal strength is
tuned in, the frequency stops changing.
• When you repeatedly press the button, the frequency
changes step by step.
To stop searching manually, press either button.
REC
REC
FM AM
Main unit:
1
sec.
UP
DOWN
If the received FM station is hard to listen
FM MODE/
MP3
MONO
STEREO
MONO: Reception will improve though stereo
effect is lost. MONO indicator lights up.
STEREO: Normally select this. Stereo effect will be
resumed.
To preset the stations
You can preset 30 FM and 15 AM stations.
1
Tune in to a station you want to preset.
2
Activate the preset number entry mode.
SET
• Finish the following process while the indication on the
display is flashing.
3
Select a preset number for the station you store.
Examples:
1 2 3
To select preset number 5, press
5.
4 5 6
To select preset number 15, press
+10, then 5.
9
7 8
To select preset number 30, press
+10, +10, then 10.
10
10
• You can also use the PRESET UP/PRESET DOWN
buttons.
4
Store the station.
SET
Remote
ONLY
Remote
ONLY
REC
REC
9