Playing Back A Disc - JVC UX-G30UW Instructions Manual

Playing Back a Disc

This System can play back the following discs—regular CD
and CD-R/CD-RW (recorded either in the audio CD or MP3
format).
To insert a disc
You can insert a disc while playing another source.
To close the disc tray, press 0 again.
• If you press CD 6, disc tray closes automatically and
playback starts.
To start: To pause:
To release, press again.
To select a track
Increases the track numbers.
Decreases the track numbers.
To select a group (MP3 only)
1
While disc play is stopped, activate the group select
mode.
MP 3
S.TURBO
QP Link
MP 3
S.TURBO
QP Link
2
Select a group number.
Increases the group numbers.
Decreases the group numbers.
Group number and group name appear.
To locate a particular portion
While playing a disc, press and hold until the portion you
want is reached.
PRESET/GROUP
DOWN
To locate a track directly
1
Activate the track number entry mode.
NUMBER
SELECT
To stop:
2
Enter a track number you want to play back.
To select track numbers on an MP3 disc, enter the
number in three digits. Refer to the following examples:
When selecting track 24...
1 Press SET to skip the first digit.
2 Select "2" for the second digit pressing UP or DOWN
3 Select "4" for the last digit pressing UP or DOWN
If you enter a track number that does not exist on the MP3
Track select disc...
mode
• During playback, your entry will be ignored and
playback will continue the current track.
• While playback is stopped, disc playback will remain at
Group select
the first track in the first group until press CD 6, then
mode
playback will start.
• To go back a step, press CANCEL.
UP
Fast-forwards the track.
Fast-reverses the track.
• For regular CDs
• For MP3 discs
PRESET/GROUP
DOWN UP
Increases the
numbers.
Decreases the
numbers.
button repeatedly, then press SET.
button repeatedly, then press SET or CD 6.
Remote
ONLY
Remote
ONLY
S.TURBO
QP Link
3
MP
S.TURBO
QP Link
SET
9