Blade Drive; Tire Size; Tire Pressure; Dimensions (Tractor And Mower) - Walker Model MS (13 HP) Owner's Manual

Specifications
MODEL
TRANSMISSION (continued)
Transmission Fluid
Factory Service
Transmission Fluid Capacity
Transmission Cooling
Ground Travel Speed
Forward m.p.h. (km/h)
Reverse m.p.h. (km/h)

BLADE DRIVE

PTO Shaft
Blade Spindle
Blade Drive Clutch and Brake
Max. Blade Speed
[22 in. (56 cm) Blade] @ 3600
RPM Engine

TIRE SIZE

Deck Caster Wheel
Deck Caster Wheel (Optional)
Drive
Drive (Optional Wide Tire)
Rear

TIRE PRESSURE

Deck Caster Wheel
Drive
Rear

DIMENSIONS (Tractor and Mower)

Length
36 in. (91 cm) GHS Model
42 in. (107 cm) GHS Model
Width
36 in. (91 cm) SD Model
(with Deflector)
42 in. (107 cm) SD Model
(with Deflector)
36 in. (91 cm) GHS Model
42 in. (107 cm) GHS Model
4
MS
Mobil 1 Synthetic Motor Oil (15W-50)
1 qt (1 liter)
Cooling Fan Mounted on Drive Pulley
0-5 (0-8) Infinitely Variable
0-5 (0-8) Infinitely Variable
Sliding Spline Shaft with Two (2) High-Speed U-Joints
Each Blade (2) Mounts Direct on Peerless Right Angle
Gearbox with Tee Gearbox in Center Connected to PTO Shaft
(Complete Geared Drive, Peerless Model 1000 Gearboxes)
Manual Belt Tightener Clutch and Scrubber Brake
(Stops Blades within Five (5) Seconds of Disengagement)
2900 RPM
[16700 FPM (5090 m/min)]
2.80/2.50-4 Pneumatic (4-Ply)
8.25 x 2.75 (Semi-Pneumatic)
18 x 6.50-8 (4-Ply)
18 x 8.50-8 (4-Ply)
13 x 6.50-6 (4-Ply)
20 PSI (137 kPa)
15 PSI (103 kPa)
20 PSI (137 kPa)
87 in. (221 cm)
89 in. (226 cm)
41-3/4 in. (106 cm)
47-3/4 in. (121 cm)
37 in. (94 cm)
43 in. (109 cm)