Pto Drive Belt - Walker Model MS (13 HP) Owner's Manual

Maintenance Instructions

PTO Drive Belt

1. To remove the PTO drive belt:
a. Remove the engine belt, as described in
previous section.
b. Remove 1/4-20 x 3/4 bolt locating belt
guide on gearbox pulley and rotate guide
to clear belt.
Remove Bolt and Rotate Belt Guide to Clear Belt
Blade Clutch
Actuator Assembly
Engage Clutch
Clutch Idler Pulley
Lever
Clutch
PTO Belt Tightener
Linkage
PTO Drive Belt Removal
c. Move blade clutch (in direction of engage-
ment) far enough to relax belt scrubber
brake without tightening the PTO drive belt.
Roll belt off PTO drive pulley and GHS
blower pulley (GHS model only).
2. Install the PTO drive belt by reversing the
removal procedure.
adjustment and brake action.
PTO Drive
Pulley
Belt Scrubber Brake
(Relax Brake to Remove Belt)
REPLACING/REPAIRING
Check scrubber brake
Compound Pulley
Belt Guide
PTO
Drive Belt
GHS
Blower
Pulley
59