Connecting Video Components - JVC RX-F10S Instructions Manual

Connecting video components

Do not connect the AC power plug to the wall outlet until all connections are completed.
This receiver is equipped with the following video terminals—
composite video, S-video, and component video terminals.
• If your video components have S-video (Y/C-separation) and/or
component video (Y, P , P ) jacks, connect them using an S-
B R
video cable (not supplied) or component video cable (not
supplied). By using these terminals, you can get a better picture
quality in the order:
Component > S-video > Composite
IMPORTANT:
The video signals from one type of these input jacks are
transmitted only through the video output jacks of the same
type. Therefore, if a recording video component and a playing
video component are connected to the receiver through the video
terminals of different type, you cannot record the picture. In
addition, if the TV and a playing video component are connected
to the receiver through the video terminals of different type, you
cannot view the playback picture on the TV.
7 Connecting a DVD recorder or DVD player with its stereo output jacks:
L
R
OUT (REC)
Y P P
B R
MONITOR
OUT
DVR/DVD
IN
VCR
IN
COMPONENT VIDEO
Green Blue
NOTE
When connecting a DVD recorder or DVD player to the
component video input jacks, make the component video input
setting (DVD VIDEO) correctly for AV COMPU LINK remote
control system. See page 21 for details.
AUDIO
DVR DVR/DVD VCR
OUT
IN (PLAY)
(REC)
VIDEO
VCR
DVR DVR/DVD
OUT
OUT (REC) IN (PLAY) (REC)
Red
Component video cable (not supplied)
Turn off all components before making connections.
• When you connect other components, refer also to their
manuals.
DO NOT use a TV through a VCR or a TV with a built-in
VCR; otherwise, the picture may be distorted.
CAUTION:
If you connect a sound-enhancing device such as a graphic
equalizer between the source components and this receiver, the
sound output through this receiver may be distorted.
If your video components have AV COMPU LINK terminal
See also page 32 for detailed information about the connection
and the AV COMPU LINK remote control system.
Red
White
Stereo audio cable
(not supplied)
White
Red
Å
Ç
Composite video cable
(not supplied)
S-video cable (not supplied)
Å To left/right audio channel output
ı Only for DVD recorder: To left/right audio channel
input
Ç Only for DVD recorder: To composite video input
Î To composite video output
‰ To S-video output
Ï Only for DVD recorder: To S-video input
Ì To component video output
• Connect Y, P , and P
B
DVD recorder or
ı
DVD player
Î ‰ Ï Ì
correctly.
R
7