Basic Setting Items - JVC RX-F10S Instructions Manual

In the following cases, set the speakers manually.
• When the receiver detects the sound but as "SILENT" twice
in succession.
The setting is made. (The distance of the speakers from which
sound has not been detected is set to "+9.0m (+30ft).")
The receiver exits from Smart Surround Setup.
• When the receiver fails to detect the sound three times.
"MANUAL" appears on the display. The receiver exits from
Smart Surround Setup.
To cancel Smart Surround Setup, press SMART SURROUND
SETUP while "SETTING UP" flashes on the display.
• No other operations can be accepted after "SETTING UP" stops
flashing. Complete the Smart Surround Setup.
To check the setting made by Smart Surround Setup, press
SMART SURROUND SETUP while the receiver is in normal
operation mode.
The setting values appear one after another (see page 16).
• If you have changed speaker distance and/or output level
manually after using Smart Surround Setup, "MANUAL"
appears.
• If you have not used Smart Surround Setup, "NO S.S.S."
appears.
NOTES
• The speaker distance and output level manually set will be
applied instead of those set by using Smart Surround Setup in
the following cases:
– When you change one of the speaker distance (see page 19).
– When you change one of the speaker output level (see page
23).
– When you change one of the speaker size either from "NO" to
"SML" or "LRG," or from "SML" or "LRG" to "NO" (see page 18).
• When you want to adjust the speaker distance and output level
manually, see pages 19 and 23.
• Do not clap your hands so hard that it may hurt your hands.

Basic setting items

You can adjust the following items. See pages in parentheses for
details.
• You cannot select the items which is not available with the
current setting.
Items To do
SUBWOOFER Register your subwoofer. (18)
FRONT SPK Register your front speaker size. (18)
CENTER SPK Register your center speaker size. (18)
SURRND SPK Register your surround speaker size. (18)
S BACK SPK Register your surround back speaker size.
(18)
DIST UNIT Select the measuring unit for the speaker
distance. (19)
FRNT L DIST* Register the distance from the left front
speaker to your listening point. (19)
FRNT R DIST* Register the distance from the right front
speaker to your listening point. (19)
CENTER DIST* Register the distance from the center speaker
to your listening point. (19)
SURR L DIST* Register the distance from the left surround
speaker to your listening point. (19)
SURR R DIST* Register the distance from the right surround
speaker to your listening point. (19)
S BACK DIST* Register the distance from the surround back
speaker to your listening point. (19)
SUBWFR OUT Select sounds emitted from the subwoofer.
(19)
EX/ES Select the EX/ES reproduction mode. (20)
DUAL MONO Select the Dual Mono sound channel. (20)
CROSS OVER Select the cutoff frequency to the subwoofer.
(19)
LFE ATT Attenuate the bass (LFE) sounds. (19)
MIDNIGHT M. Reproduce a powerful sound at night. (20)
DIGITAL IN1 Select the component connected to the digital
coaxial terminal—1(DVR/DVD). (21)
DIGITAL IN2 Select the component connected to the digital
optical terminal—2(DBS). (21)
DIGITAL IN3 Select the component connected to the digital
optical terminal—3(VCR). (21)
AUTO SURRND Select Auto Surround mode. (21)
DVD VIDEO Select the type of video terminal used for the
DVD recorder or DVD player. (21)
VCR VIDEO Select the type of video terminal used for the
VCR. (21)
* If you have used Smart Surround Setup on page 16, these
settings are not required.
CONTINUED ON THE NEXT PAGE
17