Av Colour Adjustment; Power Return Feature - Toshiba 32W300P Operating Instructions Manual

AV colour adjustment/Power return feature
30E2825A_En_P32-BACK

AV colour adjustment

The AV Colour setting only applies when viewing de-
vices connected to the AV inputs.
1
In
2
Press
3
If AUTO option does not work, press
desired colour (e.g. NTSC 3.58).
4
Press EXIT to return to the normal screen.
Note:
PAL is the colour system used in Germany. NTSC 3.58 is used
in the USA, PAL 60 used in Germany handled video recorders,
which play NTSC video tape recording.
DVD players that play NTSC DVDs (ie.multi-region/region
code-free), can produce different signals according to each
particular model - the following signals may be output from the
player: PAL, SECAM, NTSC 3.58, NTSC4.43 and PAL60. If
possible select RGB on the DVD player as the output signal
instead of any of these types, and connect the DVD player to
TV with a SCART cable.

Power return feature

If the power is cut off while you are viewing the TV and the
power is resupplied, the Power return feature will turn the TV
on automatically.
If the power is going to be off for a long time or you are going to
be away from the TV for a long time, unplug the power cord to
prevent the TV from turning on in your absence.
35
menu, select AV COLOUR.
or to select AUTO.
A V 2 I N P U T A V
A V 2 O U T P U T T V
A V C O L O U R A U T O
A U T O / PA L / S E C A M / N T S C 4 . 4 3
N T S C 3 . 5 8 / PA L 6 0
B A C K L I G H T 1 6
: S E L E C T : A D J U S T
E X I T : E N D M E N U : R E T U R N
1/15/07, 8:27 PM
or to select
35