Specifications - JVC RX-6020VBK Instructions Manual

Specifications

Amplifier
Audio
Audio Input Sensitivity/Impedance (1 kHz):
Audio Input (DIGITAL IN)* :
Audio Output Level:
Signal-to-Noise Ratio ('66 IHF/'78 IHF):
Frequency Response (8 Ω):
Video
Video Input Sensitivity/Impedance:
Composite video:
Video Output Level/Impedance:
Composite video:
Synchronization:
Signal-to-Noise Ratio:
Output Power
At Stereo operation:
Front channels:
At Surround operation:
Front channels:
Center channel:
Rear channels:
DVD, VCR, TV SOUND, CD, TAPE/CDR:
Coaxial: DIGITAL 1 (DVD):
Optical: DIGITAL 2 (CD):
* Corresponds to Linear PCM, Dolby Digital, and DTS Digital Surround
(with sampling frequency — 32 kHz, 44.1 kHz, 48 kHz).
TAPE/CDR, VCR:
DVD, VCR, TV SOUND, CD, TAPE/CDR:
DVD, VCR, TV SOUND, CD, TAPE/CDR:
Tone Control: Bass (100 Hz):
Treble (10 kHz):
VCR, DVD:
VCR, MONITOR OUT:
Negative
45 dB
Designs & specifications are subject to change without notice.
100 W per channel, min. RMS, driven into 8
40 Hz to 20 kHz with no more than 0.8% total
harmonic distortion.
100 W per channel, min. RMS, driven into 8 Ω at 1 kHz with no
more than 0.8% total harmonic distortion.
100 W, min. RMS, driven into 8 Ω at 1 kHz, with no more than
0.8% total harmonic distortion.
100 W per channel, min. RMS, driven into 8 Ω at 1 kHz, with no
more than 0.8% total harmonic distortion.
220 mV/47 k Ω
0.5 V (p-p)/75 Ω
–21 dBm to –15 dBm (660 nm ±30 nm)
220 mV
87 dB/78 dB
20 Hz to 20 kHz (±1 dB)
±10 dB
±10 dB
1 V (p-p)/75 Ω
1 V (p-p)/75 Ω
Ω
,
31