Software Programming; Description Of Software Booting; Language Groups - Siemens C10 Service Manual

6

Software programming

The software of the C1x handset is programmed directly from a PC using a
bootadapter as an interface beetween serial port of the PC and the mobile.
6.1

Description of software booting

 Connect COM-port of PC to the bootadapter
using the enclosed RS232 cable.
ˆ  Afterwards plug in AC-Adapter: If connected
correctly the "Power" lamp will be active.
9  Switch off the C1x handset and connect it to the
boot adapter.
X  Copy bootsoftware to the PC and follow the
instructions in the file "readme.txt".
Ordering number of Bootadapter: L24857-F1006-A30
6.2

Language Groups

Since the C1x has a big memory, a lot of languages fit into one handset
software.
That's why there is only one language group at the moment. More may be defined later.
Catalan
Dutch
French
Hungar
Malayian
Portu
Swedish
Attention:
This information is subject to change! Contact your service coordinator for the latest
update and ordering numbers.
Service Manual C1x
Sm_C1x_lvl2_v10_w97.doc
The bootadapter comes complete with AC-
Adapter, RS-232 and handset connection cable.
Cestina
English
German
Inggris
Norsk
Russian
Turkish
V 1.0
Page 17 of 23
Private Communication Systems
Mobile Phones
Bootadapter
RS-232
AC-Adapter
Danish
Finnish
Greek
Italian
Polish
Spanish
Connection Cable
PN MP ST
R. Fleuren
09/98