LG WT4801CW Service Manual page 23

Loosen but do not remove the 6 screws that secure
SNAP RING.
the stator.
Check the direction of SNAP RING.
(The handle of snap ring is toward rotor and stator.)
Hold the stator with one hand and remove the
screws.
Be sure to keep the wiring harness out of the way
when reassembling. Damage to the wires could
Hall Sensor
cause a short or noise and interference.
Stator Housing
Water Guide
7) Replacement of Bearing Housing
Assembly
Loosen the 14 screws attaching the bearing housing
assembly and pull it up.
23