3-3. FUNCTION OF EACH BUTTON
Push again, power goes off
Power goes off automatically after the wash
After turning the power on, the unit will
automatically turn off if nothing is selected.
Delayed finishing time.
The time increases when the button is pushed.
The following settings are indicated as the
button is pushed 1
To cancel delay time, turn the power switch
off or push DELAY WASH button until off.
Gives additional soak time.
for a better
The time shown on the display is the estimated cycle time. If the sensors and microprocessor elect to
make changes during the cycle, the display will be adjusted accordingly.
DELAY WASH (Selection)
It operates in all cycles.
During being detected by the sensor, the LOAD
SENSING LED flashes.
It automatically sensing the size of the load.
During this step, the washing machine selects an
optimized washing algorithm.
you to store a
future use .
WASH / TEMP.
Select to select Water
Pressing the button allows
The selection of TAP COLD
Default setting is Warm/Cold.