Recording From A Vcr Or Camcorder - LiteOn LVW-5045 User Manual

R
ECORDING

Recording from a VCR or Camcorder

Before starting to record
This DVD recorder can accept standard CVBS (RCA) analog
audio/video cable or IEEE-1394 cable and record Camcorder
onto DVD in the digital video format of your choice. The unit
functions much like a digital VCR. Examples of use include
archiving videotapes or transferring from a Video Cassette
Recorder or Camcorder to a recordable DVD disc or hard disk
drive. This DVD recorder allows basic DV control with the DVD
Recorder' s remote control when connected via the DV Link.
The front panel and rear panel connection
Connect a Video Cassette Recorder or Camcorder to the unit' s
input terminals.
To start recording
1. Press the [HDD/DVD] button to set the target
device for the recording.
If "DVD" is set as the target device, press [
open the disc tray and insert a recordable DVD disc with the
label side facing up.
If a new recordable CD-R or an empty CD-RW is used for
recording, press [t] [u] [p] [q] to select the disc format the
disc is to be prepared as and press [ENTER] .
2. Press [SOURCE] to select the signal-input (TV,
FrontAV, SCART, DV).
3. Start to play on the VCR or Camcorder.
4. Press [RECORD] on the DVD recorder to capture
your video/audio signal from the VCR or
Camcorder onto a recordable DVD disc or hard
disk.
5.Press [ STOP] to stop recording.
To pause recording
Press [ PAUSE] to pause recording. If you want to restart
recording, press the [
Note:
When a recordable DVD-RW is used for recording, you need to first
select either "Quick preparation" or "Full preparation" and press
[ENTER] for the disc to be prepared for recording.
23
OPEN/CLOSE] to
PAUSE] button to resume recording.