Setting The Timer - LiteOn LVW-5045 User Manual

T R
IMER ECORD
Prior to timer record
Please ensure that the recordable DVD disc or the HDD has
enough available space for the Timer Record function. Before
you start to record, follow the steps to set the date, time,
picture quality and channel of the program or input source
manually. You can set up 16 individual sessions in the Timer
Recording function.

Setting the timer

1. Press [ POWER] to turn the unit on.
2. Press [TIMER] to display the "Timer-Record"
menu.
3. Press [p][q] to select an item from the timer
setting list and press [ENTER] to activate the
system setup menu for the Timer Record function.
4. Press [t] [u] [p][q] to select "Source
(Signal Source)," and then press [ENTER] to
bring up the list.
Press [p] [q] and [ENTER] to make your selection.
5.
Press [t] [u] [p][q] to select "Channel (TV
Channel)," and then press [ENTER] to bring up
the list. This step only applies when the "TV" is
selected as the source.
Press [p] [q] and [ENTER] to make your selection.
6.
Press [t] [u] [p][q] to select "HDD/DVD,"
and then press [ENTER] to bring up the list.
7.
Press [t] [u] [p][q] to select "Mode
(Recording mode)," and then press [ENTER] to
bring up the list.
Press [p] [q] and [ENTER] to make your selection.
Recording quality for timer recording on DVD discs and
HDD:
HQ <-> EP <->LP<->SP <-> SLP <-> Just Fit
Recording quality for timer recording on CD discs:
Audio CD <-> VCD <-> SVCD
8. Press [t] [u] [p][q] to select "Repeat
(once, daily or weekly)," and then press [ENTER]
to bring up the list.
If you select "Once," you need to set the date. Move the cursor
to highlight "date" and press [ENTER]. Use the numbered
buttons (0~9) or [p] [q] [t] [u] to enter the date.
If you select "daily," you do not need to set the date since the
Timer Record is set for each day until the timer recording item is
cancelled or the media is full.
If you select "weekly," a weekly calender will display on-screen
for you to select the day. Press [p] [q] [t] [u] to move the
cursor to highlight the desired day and press [ENTER] to make
your selection. When completed, move the cursor to "EXIT" and
press [ENTER] to save the desired setting.
Notes:
If the mode is set as "daily" or "weekly," press [t] [u] [p] [q]
to move the highlighted cursor to the "ADVANCED" icon and
press [ENTER]. You can choose to apply the setting "without
restriction" or "with restriction." When "with restriction" is
selected, enter the "START" date and "END" date to set the
period of time for a valid setting. Move the highlighted cursor to
"OK" and press [ENTER] to confirm the setting or to "CANCEL"
and press [ENTER] for resetting.
27