Setting The Vcr Plus+System - LiteOn DD-A100X User Manual

Setting the VCR Plus+System

(Select Models Only)
Before you start...
. • Check if your model features the VCR Plus+ system
support.
Model Comparison Chart (back cover)
..........................................................................................
The VCR Plus+ system is a specially-designed
feature for recording TV programs. The system greatly
simplifies the timer recording process, as it does not
require users to enter program information, such as date,
channel number and start/end time, which are all contained
in PlusCode programming numbers. You can complete the
timer recording setup simply by inputting the PlusCode
number, which can be found in most newspapers, TV
listing magazines or online sources.
Setting up VCR Plus+
System
As channel numbers may vary depending on where you
live, it is suggested that you build up a matching channel
list when you first set up the DVD recorder. This step will
help you to make use of the VCR Plus+ system for future
timer recording settings.
1. Press TV(MODE) or press SOURCE to set 'TV' as
the signal source.
2. Press EDIT to display the Channel Editor menu.
3. Press  to select a TV channel, then press ENTER.
4. Press  to select 'GCN', then press ENTER.
Started_Advanced_03_01
The dialogue box for entering GCN will appear.
5. Press the number buttons (0-9) to enter the GCN (guide
channel number), which is the channel number used by
the VCR Plus+ system, then press ENTER.
6. To set GCN for other channels, repeat steps 3-5.
7. When completed, press  to select 'Exit', then
press ENTER.
22