Advertisement
VOLTAGE WARNING: Before connecting the tool t o a power source (receptacle,
outlet, etc.) be sure the voltage supplied is the same as that specified o n the
nameplate of the tool. A power source w i t h voltage greater than that specified
for the tool can result in SERIOUS INJURY t o the user
-
as well as damage t o
the tool. If in doubt, DO NOT PLUG IN THE TOOL. Using a power source w i t h
voltage less than the nameplate rating is harmful t o the motor.
ADDITIONAL SAFETY RULES
1. Always be sure that the tool is switched o f f and unplugged before carrying
2.
Use only Makita genuine driver bits and screw strips specified for this tool.
3.
Always be sure you have a firm footing.
4.
Hold the
tool
firmly and squarely against the workpiece.
5.
Keep hands away from rotating parts.
6.
When driving into walls, floors or wherever "live" electrical wires may be
encountered,
DO
NOT TOUCH ANY METAL PARTS
OF
THE TOOL!
Hold the tool only by the insulated grasping surfaces t o prevent electric shock
if you drive into a "live" wire.
7.
Never lubricate the moving parts such as the feeder box. Malfunction of the
tool may result.
out any work on the tool.
Be sure no one is below when using the tool in high locations.
SAVE THESE INSTRUCTIONS.
4
Advertisement
