Baffle For Manitowoc™ Cubers; Baffle For "Q" Series Ice Machines; Manual Fill Lid For Dispensers With A Cuber - Manitowoc MII 150 Installation & Service Manual

When installing a Manitowoc
tion. The baffle kit is designed to prevent ice from lying against the front of the ice machine, and melting down the
front of the dispenser. There are two different baffle kits available, one kit is for the 30" wide "S" series ice machine,
and the other kit is for the 22" wide "S" series ice machine.
These two Kits are available through your local Manitowoc Distributor. List prices may be subject to change without
notification. Please call your local parts distributor for current pricing before ordering.
Ice Maker Baffle Installation:
1. Remove both front panels.
2. Examine the ice machine to see if the machine has
four screws on the lower front plastic panels.
3. If there are screws, remove them from the counter-
sunk holes on the front surface of the machine, save
the screws.
4. Install the deflector, using the four screws removed
in step three.
5. Four screws and two backing plates are in the kit.
6. If there are no screws on the ice machine (step 2),
pierce the thin plastic countersunk holes, install the
backing plates and install the deflector using the
screws from the kit.
7. Replace the front panels.
1. Position baffle on top of water well with tab on the
front and the other tab inside the water well.
2. Mount the baffle on the left side of the ice maker
using the hole and screw provided.

MANUAL FILL LID FOR DISPENSERS WITH A CUBER

If you are top mounting your MII Series dispenser with a
cuber, you will require a lid for the manual fill area at the
top, front of the dispenser.
INSTALLATION
BAFFLE FOR MANITOWOC™ CUBERS
™ "S" series Ice Machine on a MII dispenser, a baffle kit is required for proper installa-

BAFFLE FOR "Q" SERIES ICE MACHINES

Part Number
5029518 ........................ Baffle Kit 30"
5029517 ........................ Baffle Kit 22"
If you ordered a dispenser and a cuber at the same time,
the manual fill lid was included with the unit. The manual
fill lid can be ordered from your local Multiplex distribu-
tor.
Installation and Service Manual
Description
11