Emergency Flashers; Turn Signals - Toyota 1997 Tercel Owner's Manual

Table of Contents

Advertisement

High-Low
beams—For high beams,
turn the headlights on and push the lever
away from you (position 1). Pull the lever
toward you (position 2) for low beams.
The headlight high beam indicator light
(blue light) on the instrument panel will tell
you that the high beams are on.
Flashing the high beam headlights
(position 3)—Pull the lever all the way
back. The high beam headlights turn off
when you release the lever.
You can flash the high beam headlights
with the knob turned to "OFF".
58
WWW.MANUALS.WS

TURN SIGNALS

To signal a turn, push the headlight/
turn signal lever up or down to posi-
tion 1.
The key must be in the "ON" position.
The lever automatically returns after you
make a turn, but you may have to return
it by hand after you change lanes.
To signal a lane change, move the lever
up or down to the pressure point (position
2) and hold it.
If the turn signal indicator lights (green
WWW.MANUALS.WS
lights) on the instrument panel flash faster
than normal, a front or rear turn signal bulb
has burned out.

Emergency flashers

To turn on the emergency flashers,
push the switch.
All the turn signal lights will flash. To turn
them off, push the switch once again.
Turn on the emergency flashers to warn
other drivers if your vehicle must be
stopped where it might be a traffic hazard.
Always pull as far off the road as possible.
The turn signal light switch will not work
when the emergency flashers are operat-
ing.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents