Connecting Other Equipment - JVC MX-DVA5 Instructions Manual

Connecting Other Equipment

• DO NOT connect any equipment while the power
is on.
• DO NOT plug in any equipment until all
connections are complete.
To connect the TV
Connect your TV and this unit using the composite video
cord (supplied) or an S-video cord (not supplied).
• After connection is correctly done, set "VIDEO OUTPUT"
setting correctly (see page 29); otherwise, no picture will be
shown on the TV screen.
S-VIDEO
OUT
VIDEO
OUT
Composite video cord
(supplied)
To composite
video input
TV
Using an S-video cord gives you better quality
pictures.
To connect other audio components
7 Analog components
Be sure that the plugs of the audio cords are color coded:
White plugs and jacks are for left audio signals, and red ones
for right audio signals.
For playing the other equipment through this unit,
connect between the audio output jacks on the other
equipment and the AUX IN jacks by using an audio cord (not
supplied).
S-video cord
(not supplied)
For recording sounds through this unit on the other
equipment, connect between the audio input jacks on the
To S-video
other equipment and the LINE OUT jacks by using an audio
input
cord (not supplied).
• See "About sounds reproduced through the rear terminals"
on page 9.
– 8 –
Audio equipment
To audio output
Audio equipment
To audio input
Continued
AUX IN
LINE OUT